Product Categories
- Car key shell
- Remote key shell
- Smart car key shell
- Modified flip key shell
- Transponder chip key
- OEM remote key & battery
- After market remote key
- Remote interior
- Remote PCB board
- TJECU smart car key
- Lonsdor/K518 smart key
- Remote button rubber
- KD key Blade & KEYDIY Remote Blade
- Smart emergency key & Other
- Car lock picking tools
- Home door lock pick tools
- Auto lock pick and decoder picks
- LiShi 3 in 1 auto decoder tools
- NP smart Lock picks Tools
- Home door 2 in 1 decoder tools
- Turbo Decoder Lock picks Tools
- key machine cutter / Tracer
- Key Cutting Machine
- Key moulds / clamps
- Double bit key tool
- ELV Lock Motor
- Car Lock Reed Plate
- Auto Car Locks
- Other
- KEYDIY machine & KD device
- KEYDIY General Remote Control
- VVDI Xhorse Universal Remote
- KYDZ Machine&Universal Remote
- JMD Machine & Super Remote
- Remote control duplicable device
- IC/ID Card duplicable device
- ID/IC button duplicator
- UID/ID Pet Key tag
- Press to Press type
- General machine type
- Special use For Garage Door
- Other
- Auto Key Programmer
- Auto Key decoder
- Car Diagnostic Tool
- Xhorse & VVDI Products
- Xtool & iOBD2 Products
- OBDSTAR Products
- Lonsdor K518 Products
- Heavy Duty Diagnostic
- Mileage Programmer
- Reset programmer
- Auto ECU Tunning Programmer
- OBD2 Code Scanner
- VAG Diagnostic Tool
- OBD2 Cable and Connector
- Airbag Reset Tool
- Diagnostic software
- Ribbon Cable
Auto Key Programmer



SKU: TM008034
Category: Auto Key Programmer
Stock: in stock
Description
Spanish Language T300 Auto Key Programmer
Black T-300 Car Key Maker T Code Programmer
T300 T300+ Key Programmer is traditional auto key programmer
for locksmith to program vehicle when all key lost.
This version is in Spanish language.
Language: Spanish
T300 T300+ Key Programmer Vehicle Coverage:
For Acura, for Audi, for Alfa, for Chevrolet, for Citroen, for Daewoo, for Fiat, for Honda,
for Hyundai, for Isuzu, for Infiniti, for Jaguar, for Kia, for Land Rover, for Lancia, for Lexus,
for Lincoln, for Mazda Japan, for Mazda USA, for Mercury, for Mitsubishi, for Nissan,
for Peugeot, for Renault, for Rover, for Seat, for Skoda, for Suzuki, for Toyota Japan,
for Toyota USA ,for Volkswagen and for VW/Audi (Pin Code Reading) , for Chrysler;
Notice:
1. It can't Do for Ford, for GM and for Holden
2. In order to make the pacakge easy to pass through customs, we don't take the case
into the package to make the pacakge as small as possible.
Functions:
1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code
3. Read the system data stream
4. Read IMMO/ECU ID
5. Fetch the machinery key code
6. Clear vehicle key memory
7. Program new key
8. Read vehicle key login password
9. Distinguish types of ECU
10. ECU-IMMOBILISER programme
11. Read EKA password
12. Programme new EKA password
13. Programme telecontrol implement
1. Install Steps:
For VW Transponder key matching with 5 digits Login Code
Procedure for adding transponder keys to vehicles with separate Immobilizer box:
(German Car A to year 97, for Golf 3, for Passat B4, Transporter, for Lupo, for Sharan)
1) Switch ignition ON with new key.
2) Select: Immobilizer -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 1234 -> Save
3) Go to Adaptation
4) Enter 01 in "Channel Number"
5) Enter
6) Enter number corresponding to the total number of keys to be matched, The "Stored Value" is the
number of keys currently matched. For example, Enter 2 -> Save
7) Switch ignition off and remove key
8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step with each key
until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in "Channel Number"
11) Enter 0 and Save. This will learn ECU with Immobilizer.
2. Procedure for adding transponder keys to vehicles with Immobilizer
in the instrument cluster:
(German Cars A from year 1997, for Golf 2004, for Passat B5, B6 )
1) Switch ignition ON with new key.
2) Select: Instrument -> Login: Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 01234 -> Save
3) Go to Adaptation
4) Enter 21 in "Channel Number"
5) Enter
6) Enter number corresponding to the total number of keys to be matched. The "Stored Value" is
the number of keys currently matched. For ex, Enter 2 -> Save
7) Switch ignition off and remove key
8) Insert next key to ignition and switch ignition on again. Wait 15 sec. Repeat this step
with each key until all keys have been matched.
9) Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
10) Enter 00 in "Channel Number"
11) Enter 0 and Save. This will learn ECU with Immobilizer.
T300 Key Programmer Package List:
1.T300 main unit
2.For Cigarette Lighter power adapter cable
3.For GM/Daewoo 12P connector cable
4.For Honda-3P connector cable
5.For Nissan 2000 OBDII connector cable
6.For Nissan 14P connector cable
7.OBDII-16P connector cable c/w power input jack
8.VAG OBDII Female to 2x2 adapter cable
9.For Chrysler-1 Adapter (138)
10.For Chrysler-2 Adapter (139)
11.For Honda 3P Adapte
12.For Mitsubishi Adapter
13.For Nissan Adapter (133)
14.For Suzuki Adapter
15.For HONDA Adapter
16.ADC 145 Adapter
17.For Peugeot Adapte