Product Categories
- Car key shell
- Remote key shell
- Smart car key shell
- Modified flip key shell
- Transponder chip key
- OEM remote key & battery
- After market remote key
- Remote interior
- Remote PCB board
- TJECU smart car key
- Lonsdor/K518 smart key
- Remote button rubber
- KD key Blade & KEYDIY Remote Blade
- Smart emergency key & Other
- Car lock picking tools
- Home door lock pick tools
- Auto lock pick and decoder picks
- LiShi 3 in 1 auto decoder tools
- NP smart Lock picks Tools
- Home door 2 in 1 decoder tools
- Turbo Decoder Lock picks Tools
- key machine cutter / Tracer
- Key Cutting Machine
- Key moulds / clamps
- Double bit key tool
- ELV Lock Motor
- Car Lock Reed Plate
- Auto Car Locks
- Other
- KEYDIY machine & KD device
- KEYDIY General Remote Control
- VVDI Xhorse Universal Remote
- KYDZ Machine&Universal Remote
- JMD Machine & Super Remote
- Remote control duplicable device
- IC/ID Card duplicable device
- ID/IC button duplicator
- UID/ID Pet Key tag
- Press to Press type
- General machine type
- Special use For Garage Door
- Other
- Auto Key Programmer
- Auto Key decoder
- Car Diagnostic Tool
- Xhorse & VVDI Products
- Xtool & iOBD2 Products
- OBDSTAR Products
- Lonsdor K518 Products
- Heavy Duty Diagnostic
- Mileage Programmer
- Reset programmer
- Auto ECU Tunning Programmer
- OBD2 Code Scanner
- VAG Diagnostic Tool
- OBD2 Cable and Connector
- Airbag Reset Tool
- Diagnostic software
- Ribbon Cable
Xhorse & VVDI Products



SKU: TM007310
Category: Xhorse & VVDI Products
Stock: in stock
Description
Xhorse VVDI for BMW Immobilizer Diagnostic Coding and Programming Tool
V1.5.0 Xhorse VVDI for BMW Diagnostic Coding and Programming Tool
Product Description
Xhorse VVDI for BMW Highlights:
1. Support E/F/G chassis Programming function
2. Support E/F/G chassis coding function
3. OBD key Key: Support CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
4. File Generation Key: Supports CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc.
5. Support FEM/BDC system to generate keys, replace FEM/BDC control unit, support reset mileage
6. Supports mileage correction CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+
7. Support for reading EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
8. Support simultaneous engine and CAS, synchronous ELV and CAS
9. Support reading ISN data from the engine
10. Support reset 8HP gearbox in F chassis.
11. Support exchange ECU and CAS.
Support Languages: English, Italian, Spanish, German, Hungarian, Polish and Chinese.
What's the difference between VVDI2 for BMW and VVDI for BMW?
VVDI for BMW is not only for locksmith, it has functions of coding and programming and much more.
VVDI for bmw has possibility for manual coding and changing cars vo (vehicle order ) ,
emergency flash and retrofit options.
VVDI for BMW Change ECU List:
Xhorse VVDI for BMW Tool Latest Update Information:
VVDI for BMW Tool release new version v1.4.7.
VVDI for BMW 1.4.7 2019-12-26
************************************************************************
===== for BMW V1.4.7 =====
1. Improvement for E-Series coding and programming-Bugfix for E65
2. Improvement for F-Series coding and programming-Support select target version
manually
3. F/G-Series support update I-step
4. Bugfix for G-Series identification
5. Improvement for FEM/BDC prepare dealer key
6. Improvement for CAS4 prepare dealer key
7. Add transponder function: Menu->Special Function->Transponder Read/Write support
HITAG2, HITAG3
8. Support chassis classify, VIN decode function
9. Add special function for F/G series: Reset engine start, switch off transport
mode, reset ELV, write SVT, initialize Flexray etc.
VVDI for BMW 1.4.6 2019-11-16
Require firmware V1.4.3
for BMW V1.4.6
1. Improvement for E-Series coding and programming
2. Improvement for F-Series coding and programming
3. Bugfix
VVDI for BMW 1.4.5 Date: 2019-11.08
1. Improvement for E-Series coding and programming
2. Improvement for F-Series coding and programming
3. Improvement for CAS4 OBD key learning
VVDI for BMW 1.4.2 Date: 2019-09-20
Firmware: Require VVDI for BMW firmware V1.4.2
1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code
2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whole database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key information
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file
5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via programmer and via ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on ignition without working key
6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y),
CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key
7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information
8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
9. Read E-Series/F-Series ECU ISN via OBDII
1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU
10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support change CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump
11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM),
you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)
12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version
13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made for BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG
Xhorse VVDI for BMW FAQs:
Question 1:Can this tool reset for bmw Fem module mileage to 0000 same as vvdi2 ?
Answer 1:hello,VVDI for BMW cover all for BMW functions on VVDI2,so it can do that.
Xhorse VVDI for BMW Parameters:
Working Temperature: -20-70°C (-4-158°F)
Storage Temperature: -40-80°C (-40185°F)
Product Size: 146*85*33mm
Packing Size: 355*283*87
Host net weight: 0.23kg
Order process
Regist an account by your email - Log in – Add item with quantity to the cart – Submit(check out) – Choose the salesman
Our company
We’re Shenzhen Emyray Tech Co.Ltd. Our main product are car keys, auto remote shells, transponder chips, key programmers, locksmith tools, which exported around the world, including South Africa, France, USA, India, Romania, Indonesia and other countries. Our company has been providing good service, high quality products and reasonable price. We are willing to do long term business with each customer, welcome for your inquiry.
Our service
1.We supply many different kinds of car keys, transponder chips, key programmers, locksmith tools, etc.
2.Any inquires will be replied within 24 hours. If nobody answer you online please leave us a message.
3.Each item would be tested before sending to our customer, you could place a trial order to test our quality as well.
4.If you have any concern or confusion about our products, kindly contact with us, we’ll do our best to help you.
FAQ
Q1.How can I get the price with my interested item?
A:Please follow below steps, you will receive our quotation.
Regist an account by your email - Log in – Add item with quantity to the cart – Submit(check out) – Choose the salesman
Q2.How to make payment?
A:We accept Paypal / Western Union / TT, please inform us after you make payment, then we can arrange your parcel in time.
Q3.What about your delivery time?
A:Generally,within 3-5 working days after payment received.
Q4.May I order the sample to test the quality firstly?
A:Sample order are also highly appreciated. Usually we can supply the sample if we have them in stock, but customer have to pay the sample cost and the courier cost.
Q5.Can I exchange the product if I found that it can’t work in our country?
A:Yes,but all returned items must be in original condition, and customer need responsible for all return shipment cost.
Packing & Shipping
We pack our goods in brown cartons, all products will be well packed before shipping.
We can deliver by
Contact us