languageEnglish
  • Português
  • Русский
  • Español
  • italiano
  • Deutsh
  • Français
  • Polski
  • العربية

Product Categories

    LiShi 3 in 1 auto decoder tools

    Name: Flash Sale ProductKW1 (Right) 2 in 1 lockpick locksmith tool support home lock and cylind reader
    SKU: TM006605
    Category: LiShi 3 in 1 auto decoder tools
    Stock: in stock
    Price:$79.71
    Sale Price:$42.87
    QTY:
    -
    +

    Description

    KW1 (Right) locksmith tool support home lock and cylind reader

    auto key-tb.jpg

    KW1 (Right) lishi lock pick set lishi locksmith tool

    KW1 (Right) lock pick alarm lishi locksmith support home lock and cylind reader

    Advantages:

    1. The design of the KW1 (Right) functions more closely to a standard lock pick;

    2. The basic design of the tool is more fragile in nature so you should never force the lifter tip up if a pin is difficult to move.

    3. It may help to visualize the KW1 (Right) 2-In-1 Pick as a tool that uses finesse rather than brute force when you use it. 

    KW1-lishi-lock-pick-set-lishi-locksmith-tool_03.jpg

    Steps for usage:

    Step 1 – Cleaning the Kwikset or Compatible Lock

    instruction:

    1. Spray some CRC Electronic Cleaner into the lock’s keyway to flush out any dirt or debris that may be present.

    2. Run a KW1 key blank, in and out of the lock approximately 25 times to exercise the pins and springs.

    3. Spray some CRC Heavy Duty Silicone (or lubricant of your choice), into the lock's keyway to lightly lubricate

        the tumblers (Silicone is a good lubricant for picking as it does not leave behind residue that can gum up the lock).

    4. Again, run a KW1 key blank, in and out of the lock approximately 25 times to continue to exercise the pins and springs.

    5. You are now ready to insert the KW 2-in-1 Tool.

    001.png

    Step 2 – Inserting the Pick

    instruction:

    1. Carefully grasp the KW1 2-In-1 Pick in either hand.

    2. Grab the lifter arm and move it down .Lifter Tip in the Correct Position

    3. Pull the lifter arm all the way to the rear of the tool

    4. Make certain that the tension arm is all the way closed.

    5. Grasp the pick so that the tension arm remains closed and the lifter remains at the bottom of the pick’s tip.

    6. Carefully insert the KW1 into the lock’s key way.

    7. If necessary, gently rock the tool tip up and down to help guide it into the lock’s keyway.

    8. Make certain that the pick is fully inserted into the lock and that the pick’s shoulder is against the lock plug.

    图片2.png

    Step 3 – Picking a Lock With Standard Cylindrical Top Pins

    instruction:

    1. Gently open the tension arm by swinging it away from the pick body.

    2. The picking direction is dictated by the circumstances of the lock.

    3. Some locks will pick more easily if you start with cut 1 and other will pick more easily starting at cut 5.

       The starting cut is up to you, but if you find that the pins move more easily at one end rather than the other,

       start with that end. Apply a light turning tension and move the lifter arm down until the pin sets (usually indicated by a slight click).

       If the pin is picked, the lifter arm will bounce, but only by about 1 or 2 depths of movement.

    4. Repeat step 3 until all pins are set and the plug turns.

    图片3.png

    Step 3A – Picking a Lock With Spool Pins

    instruction:

    1. Gently open the tension arm by swinging it away from the pick body.

    2. The picking direction is dictated by the circumstances of the lock.

    3. Some locks will pick more easily if you start with cut 1 and other will pick more easily starting at cut   5.

    The starting cut is up to you, but if you find that the pins move more easily at one end rather than the other,

    start with that end. Apply a light turning tension and move the lifter arm down until the pin sets (usually indicated by a slight click).

    If the pin is picked, the lifter arm will bounce, but only by about 1 or 2 depths of movement.

    4. Repeat step 3 until all pins are set and the plug turns.

    图片4.png

    Step 4 – Reading the Pin Heights

    instruction:

    1. Carefully insert the KW1 into the keyway (see Step 2 above)

    2. Pick the lock (see Steps 3 or 3A above).

    3. Make certain that the tension arm is open.

    4. Starting at cut 1, gently move the lifter arm all the way until it stops on the pin.

    5. Record the depth.

    6. Repeat steps 2 and 3 until all cuts are recorded.

    图片5.png

    Order process

    Regist an account  by your  email - Log in – Add item with quantity to the cart – Submit(check out) – Choose the salesman

    Our company

    We’re Shenzhen  Emyray Tech Co.Ltd. Our main product are car keys, auto remote shells, transponder chips, key programmers,

    locksmith tools, which exported around the world, including South Africa, France, USA, India, Romania, Indonesia and other countries.

    Our company has been providing good service, high quality products and reasonable price.

    We are willing to do long term business with each customer, welcome for  your inquiry.

    Our service

    1.We supply many different kinds of car keys, transponder chips, key programmers, locksmith tools, etc.

    2.Any inquires will be replied within 24 hours. If nobody answer you online please leave us a message.

    3.Each item would be tested before sending to our customer, you could place a trial order to test our quality as well.

    4.If you have any concern or confusion about our products, kindly contact with us, we’ll do our best to help you.


    FAQ

    Q1.How can I get the price with my interested item?

    A:Please follow below steps, you will receive our quotation.

    Regist an account  by your  email - Log in – Add item with quantity to the cart – Submit(check out) – Choose the salesman


    Q2.How to make payment?

    A:We accept Paypal  / Western Union / TT, please inform us after you make payment, then we can arrange your parcel in time.

     

    Q3.What about your delivery time?

    A:Generally,within 3-5 working days after payment received.

     

    Q4.May I order the sample to test the quality firstly?

    A:Sample order are also highly appreciated. Usually we can supply the sample if we have them in stock, but customer have to pay the sample cost and the courier cost.


    Q5.Can I exchange the product if I found that it can’t work in our country?

    A:Yes,but all returned items must be in original condition, and customer need responsible for all return shipment cost.


    Packing & Shipping

    We pack our goods in brown cartons, all products will be well packed before shipping.

    We can deliver by

    SHIPPING.jpg


    Contact us 


    contact.jpg


    car key-db.jpg

    Related Products

    HUI.jpg

          ShenZhen Emyray Tech Co.,Ltd.        www.autokeymall.com       Tel: +86-755-83376535     Mob:+86-135-4415-9828

    E-mail:info@autokeymall.com      Skype: autokeymall03      QQ: 3237124068

       Warm prompt: our company website products, only for a locksmith industry personnel, the locksmith staff must provide valid documents to the company for the record after just can buy! Thanks for your cooperation!   Thank you very much!