UNIVERSAL REMOTE CONTROL

Model 380UT

Your remote control can be programmed to operate up to two devices,such as a garage door opener,gate operator, or commer cial operator and has a SMART/LEARN button.Each button on the remote control reference only and your product may look different.

PROGRAMMING

PROGRAM TO GARAGE DOOR OPENERS WITH A YELLOW LEARN BUTTON

lf your remote was previously programmed to another type of opener,see PROGRAM TO COMPATIBLE GARAGE DOOR OPENERS AND OPERATORS to reprogram to a yellow LEARN button.

1. Start with the garage door closed.

2. Press and immediately release the yellow LEARN button. The Learn LED glows steady for 30 seconds.

Within 30 seconds...

3. Press and hold the button on the remote control you wish to use.

4. Release the button when the garage door opener lights blink or two clicks are heard.

5. Test by pressing the button you just programmed. The opener activates.

To program the remote to Chamberlain accessories, refer to the manual provided with the accessory.

PROGRAM TO COMPATIBLE GARAGE DOOR OPENERS AND OPERATORS

1. Start with your garage door, gate, or commercial door closed.

2. Remove the remote control cover. Press and hold the program button until the LED turns on.

3. Press and release the SMART/LEARN button on your product or match the remote control DIP SWITCHES to the existing receiver or existing remote control.

4. Select a button to proaram on the remote control. Press and release the button the specified number of times according to the following list.NOTE: Make sure the LED stops flashing between each press of the button.The garage door opener will respond by clicking, blinking or activating.

... 8 times Chamberlain®* Yellow Button 2011-Current

... 3 times Chamberlain®* Purple Button 2005-Current

... 2 times Chamberlain®* Orange Button 1997-2005

... 4 times Chamberlain®* Green Button 1993-1996

... 6 times Genie Overhead Door® Intellicode 1995-Current

... 5 times Genie Overhead Door®* * Intellicode 2005-Current

... 1 time Linear® Mega-Code 1997-Current

... 7 times Stanely® Security Code 1998

... 9 times Wayne Dalton® Rolling Code 372.5 MHz 1999-Current

... 14 times Linear Multicode® 10Position Dip Switch

... 16 times Stanley Multicode®10 Position Dip Switch

... 18 times Linear® 8 Position Dip Switch

... 10 times Xtreme Garage®, Guardian® Black Button 2005-Current

... 11 times Sommer® Black Button1998-Current

* LiftMaster, Do-lt, Master Mechanic,Raynor, True Value and Sears Craftsman are compatible with Chamberlain technology.

** Find Genie Intellicode ll instructions at support.chamberlaingroup.com.

5. Press the program button on the remote control to save.

6. Test by pressing the button you just programmed. The opener activates.

To program the remote to Chamberlain accessories, refer to the manual provided with the accessory.

●The SMART/LEARN button or DIP SWITCHES are located either on the product or in an external receiver on or near the product. Consult your product owner's manual to locate the SMART/LEARN button or DIP SWITCHES.

●lf you have a 2 position DIP SWITCH and programming fails,reverse DIP SWITCHES (OFF to ON and ON to OFF)