V1.1.1.0 CG CGDI FC200 ECU Programmer Full Version Support 4200 ECUs and 3 Operating Modes Upgrade of AT200

Highlights:

1. Protect Original Car Parts

More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.  

2. Intelligent Recognition

The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.

3.Module Clone

Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.

4. ISN Read and Write

Supports engine computer ISN code acquisition for BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.

5.VIN modification

Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.

6. Data Processing

Support engine computer data analysis and modification for Audi/for Seat/for Skoda/for Volkswagen models;

Support the shutdown for Bosch MED/EDC17 series engine computer anti-theft system;

Support the TPROT off function for Bosch VAG MEDC17 series, for BMW/Mini MEVD17/EDC17 series, for Hyundai/Kia EDC17/MED(G)17 series.

7. FC200 not only support for BMW ECU but also support over three thousands of ECUs like K-T-A-G, K-e-s-s, Dimsport etc.

Check FC200 Support ECU List

8. Multi-Language: English, French and Simplified Chinese

For Spanish, Polish Turkish and Traditional Chinese, will need to pay $130 to get authorized seperately with serial number.

9. Full Version with All License Activated. 

Free Update Online for One Year. Annual Fee will be $200/year after the first year.

10. With New Adapters Set No Need Disassembly in Package:

Adapters Including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter.

(With this adapter set, you won't need the old B48/B58 cable anymore).

FC200 Latest Update Information:

CG FC200 V1.1.1.0 Software Update Notice on Feb 1st, 2023

1. Setup interface adds-Server Selection function

2. Optimize the device activation interface (add the "Activate" prompt)

3. Repair the failure problem of the for Bosch query abroad

4. Added for GM AcDelco transmission platform mode: for GM 6T30/35/40/45/50, GM 6T70/75/80, GM 6L45/50/80/90

5. New BOOT mode for BOSCH ST10 engine: ME7.1.1, ME7.5.10, ME7.8.2, and MED 7.6.2

6. New for BOSCH TC17 engine platform mode: ME17 TC1728 (China)

7. New BOOT mode of KEFICO TC17 engine: CPGDSH2.2x.x, CPGDSH1.26.1, KME 1.9.3.1

8. New for BOSCH VAG gearbox PFLASH calibration function: DQ200 TC1784, DQ200 TC1766, DQ250 TC1766, DL501Gen1 TC1766, VL381 TC1766

9. Newly modified VIN model: MED 17.8.3

FC200 New Software V1.0.1.0 (2021.09.11):

1. Added SH725XX gearbox computer clone: read and write MAPS, read and write EEPROM, backup data, and restore data.

(1) Support all ZF_8HP gearbox computer clones: for Alfa Romeo /for Alpina /for Aston Martin /for Audi /for Bentley /for BMW /for Chrysler /for Dodge /

for Great Wall /for Iveco /for Jaguar /for Jeep /for Lamborghini /for Land Rover /for Mann/for Maserati /for Porsche /for Rolls-Royce /for VinFast /for Volkswagen

(2) Support for VW/Audi/Skoda/Seat DQ380/DQ381 gearbox computer clone

(3) Support for Benz/Nissan 9GTronic (VGS-NAG3) gearbox computer clone

(4) Support for MINI/Renault/BMW 7-speed dual-clutch (Getarg 7DCT) gearbox computer clone

2. Added for BMW gearbox clone model:

DKG(TC1766): Read and write DFLASH, EXT DFLASH, PFLASH

3. Added ECU (for Chevrolet, Opel, Vauxhall) to read and write VIN: EDC17C59

4. New sub-function for BMW 6HP: Erase reset function

5. Added for Bosch engine boot mode: MEVD17.2.7

6. Added for D-e-l-p-h-i engine boot mode: CRD2.x TC1797, CRD3.x TC1797

7. Optimize the engine computer read and write speed

8. Fix some bugs and optimize software performance

Description:

FC200 ecu programmer is new device which is designed for ECU/EGS clone, supports functions including data reading and writing, ISN acquisition, disassembly matching, module clone, VIN modification and DTC shielding ect FC200 supports 4200 kinds of ECU, 3 tyeps of operation modes, and covers 80% of the models at the market.

FC200 ECU Programmer Powerful Functions:

1. Original parts Protection

FC200 supports OBD and platform mode for more than 98% ecu and egs, no need to open shell, no punch, protect origianal parts of the vehicle.

2. Smart Identification

The "identification" function can help users diagnose whether the ECU module is communicating and check whether the wiring is wrong.

If ECU module is not damaged and can be communicated, wiring is correct and identification is successful, can read chip and firmware information.

3. Module Clone

Supports ECU/EGS reading& writing and modules clone, synchronization matching free, no need online programming. 

Flash data by area, automatically check, protect chips and modules furthest

4. ISN Reading and Writing

Supports for all BMW series (including Mini) ECU ISN code acquisition , convenient for all keys lost matching and anti-theft fault maintenance.

5. VIN Writing

Solve the problem of double VIN or VIN mismatch of vehicles, convenient for vehicle maintenance.

6. Data Processing

Support data analysis and modification for the 4th and 5th generations for Audi/Seat/Skoda/Volkswagen ECUs

Turn off anti-theft system for Bo-s-c-h MED/EDC17 series ECU

TPROT off function for B-o-s-c-h V-A-G MEDC17 series, for BMW/Mini MEVD17/EDC17 series, for Hyundai/Kia EDC17/MED(G)17 series.

FC200 ECU Programmer Software Display:

1. Interactivate Software Interface

brand-model-engine/gearbox-ECU interface structure to help users save time and find the operating directory accurately.

2. Built-in Model Search Function

Support ECU model and for Bosch search by number, avoid the trouble of level selection, and enter the function interface as quickly as possible.

3. ECU Search

Take for BMW MSV90 ECU as an example, First select "for BMW", selct "ECU" as the search condition, enter "MSV90",click the search button, and the ECU type will show up. 

Same search procedure for Bosch ECUs.

4. Visualized Wiring Diagram

1:1 simulation, bright colors, to avoid wiring errors.

FC200 ECU Programmer Hardware:

FC200 Main Unit

1. Integrated injection of polymer materials, professional customized internal circuit boards, national patent certification

2. Exquisite design, easy to carry, can shield surrounding interference signals, adapt to various operating environments

3. There are 3 expansion ports for peripherals, which are automatically diagnosed and identified. They are 12V power port, USB port and DB15 port.The DB15 port can be connected to a free-dismantling adapter and OBD cable.

FC200 Adapters

1.Vehicle-grade wiring harness, made of synthetic metal, has excellent internal conductivity, and can be used continously for 10,0000 times.

2. Tight design, seemless connection between ECU and host to ensure continuours communication and excort your operation

3. Equipped with B-type, C-type, D-type, F-type and G-Type pin interfaces, suitable for many types of ECU and EGS

OBD2 Cable

FC200 obd2 cable mainly suitable for BMW B48/B58 ECU at present, read ISN via OBD without disassembly.

110cm, made of synthetic material, resistant to high temperature water-proof, anti-corrosion is designed according to OBD port of the vehicles, built-in anti-falling buckle make connection stable

Functions of Each Adapter:

1. MSV90 Adapter:

This adapter supports ISN reading and writing and data backup and recovery for BMW MSV90 

2. N20 Adapter:

This adapter supports ISN reading and writing, VIN modification and data reading and writing functions of the N20 and N13 of the F series chassis for BMW

3. B48/B58 Adapter:

This adapter supports ISN reading and data reading and writing functions for BMW models: MG1CS003, MG1CS024 and MG1CS201.

4. 271KE Adapter & 271DE Adapter:

These two adapters support the data backup and recovery functions for Mercedes-Benz SIM 271KE and SIM 271DE

5. 6HP & 8HP Adapter:

The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS for BMW models.

Package List:

1pc x CGDI FC200 Host

1pc x OBD Cable

1pc x Jumper

1pc x USB Cable

6pcs x G-type Adapter Cable

3pcs x F-type Adapter Cable

6pcs x E-type Adapter Cable

6pcs x D-type Adapter Cable

6pcs x C-type Adapter Cable

6pcs x B-type Adapter Cable

FC200 Adapter Set(if you need these adapters, you choose the one to place an order in our link)

including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter